FTRD® Gastroduodenal

200.72

The gastroduodenal FTRD® enables endoscopic full-thickness resection in the stomach and duodenum.

Description
Use of the gastroduodenal FTRD®

A smaller FTRD® System for endoscopic full-thickness or deep wall resection (especially in the stomach) and diagnostic tissue acquisition in the stomach and duodenum.

The gastroduodenal FTRD® can be used for:

• not pretreated non-lifting adenoma
• non-lifting recurrent adenoma
• small subepithelial tumors
• early carcinoma

The gastroduodenal FTRD®

The gastroduodenal FTRD® consists of an applicator cap with a ready-to-use mounted FTRD® clip, integrated HF snare and thread, thread retriever, the endoscope sleeve with fixation tapes and FTRD® hand wheel.

For an easier and safer introduction of the system into the upper GI-tract (passage of esophagus and pylorus) the gastroduodenal FTRD® Set is delivered with an insertion balloon and guide wire.

For application, the applicator cap is mounted on the endoscope with the snare running on the outside of the scope and the sleeve preventing entrapment of any tissue between scope and snare. By turning the hand wheel, the thread is tensioned and the clip released. Using the integrated snare, the target tissue is cut above the clip.

The size of the gastroduodenal FTRD® is suitable for endoscopes with a diameter of 10.5 – 12.0 mm and a working channel diameter of at least 3.7 mm.

The gastroduodenal FTRD® Set

The gastroduodenal FTRD® is delivered as one procedure set and consists of the following products:

  • gastroduodenal FTRD®
    – gastroduodenal FTRD® cap with preloaded clip and thread
    – snare integrated into cap’s distal end
    – FTRD® hand wheel
    – thread retriever
    – endoscope sleeve with fixation tapes
  • FTRD® Marking Probe
  • FTRD® Grasper
  • insertion balloon
  • guide wire
Ordering Information
Item No. Description Appropriate endoscopes Cap depth Cap diameter (outside)
200.72

Gastroduodenal FTRD® Set

(incl. FTRD® Grasper, FTRD® Marking Probe, guide wire and insertion balloon)

Endoscop diameter: 10.5 – 12.0 mm Working channel diameter: min. 3.7 mm

19,5 mm 23 mm